CHASSIS
Parking Brake Handle/Shaft
Assembly Removal
All Models
1. Release the parking brake (forward position).
2. Lift the floor pan and remove the panel assembly by
removing the four fasteners retaining the panel to
the frame (Fig. 092).
3
3. Remove the parking brake handle (Fig. 093).
3-18
Fig 092
PICT-0034
Fig 093
PICT-0035
4. Remove the bolts from the outer bearing of the
parking brake shaft (Fig. 094).
Fig 094
5. Remove the bolts from the inner bearing of the
parking brake shaft (Fig. 095).
Fig 095
Z Master Z400 Service Manual
PICT-0036
PICT-0037