Toro Z Master Z400 Series Service Manual page 160

6. Remove the front and rear lift chains from the mower
deck (Fig. 412).
Fig 412
7. Remove the bolts holding the cross brace to the
deck (Fig. 413).
Note: Check the cross brace bushings for wear.
Replace as needed.
Fig 413
Z Master Z400 Service Manual
MOWER DECKS/PTO
8. Secure the cross brace to the frame so it is out of
the way when removing the mower deck.
9. Raise the lift lever to the transport position.
10. Remove the 4 x 4 wood blocks from under the deck.
11. Turn the right front wheel so the castor fork is angled
forward. This will allow more clearance to slide the
mower deck out from under the frame (Fig. 414).
PICT-0126
12. Slide the mower deck out the right side of the unit
(Fig. 415).
PICT-0128
Fig 414 PICT-0130
Fig 415 PICT-0129
7
7-3