7. Apply a thread-locking compound to the clutch
retainer bolt (Fig. 362).
Fig 362
8. Install the clutch retainer bolt and two spring
washers that hold the electric PTO clutch to the
engine crankshaft (Fig. 363).
Fig 363
Z Master Z400 Service Manual
9. Torque the center bolt to 55 ft-lbs. (74.6 Nm) (Fig.
364).
PICT-0026c
10. Plug the clutch pigtail harness into the main harness
(Fig. 365).
PICT-0014
ENGINE
Fig 364
PICT-0027c
Fig 365
PICT-0100a
5
5-41