Available Service Manuals / Service Aids - Toro Z Master Z400 Series Service Manual

Hydraulic System Oil Capacity:
Fluid Type:
Fluid Level:
Model and Serial Number
Location
Fig 030
Engine Model and Serial Number
Identification:
Hydrostatic Pumps Model and Serial
Number:

Available Service Manuals / Service Aids

Hydrostatic Pumps:
Wheel Motors:
Hydraulic Troubleshooting:
Electrical Troubleshooting:
Z Master Z400 Service Manual
2.1 quarts (2.0 liters)
Mobil 1 Extended Performance 15W-50 Synthetic
Check the fluid level while the fluid is warm. The fluid should be between cold
and hot.
Note: The fluid level should be to the top of the hot level of the baffle,
when the fluid is hot (Fig. 000 above).
The unit model and serial number plate is located on the right hand side of the unit,
below the right side motion control lever (Fig. 000).
PICT-0046
Consult the appropriate engine manufacture's service literature for the
location and translation of the engine model and serial number information.
The label (Fig. 000), can be located on the pump housing. It identifies the
model and configuration of the BDP pump.
Hydro-Gear BDP-10A/16A/21L – Service and Repair Manual
Form # 492-4789
Parker/Ross Wheel Motor Service Manual
Form # 492-4753
Interactive hydraulic troubleshooting and failure analysis on compact disk
Form #492-4777
Interactive electrical troubleshooting and wiring diagrams on compact disk
Form #492-9143
SPECIFICATIONS
Fig 031
2
configuration
2-15