Seat Delay Module - Toro Z Master Z400 Series Service Manual

Location
The seat switch is mounted to the frame directly under
the seat (Fig. 395).
Fig 395
How It Works
When the seat is vacated, the switch is open and there
should be NO continuity between the two terminals.
When the seat is occupied, the switch closes and there
should be continuity between the two terminals (Fig.
396) (Deluxe suspension seat switch shown).
Fig 396
Z Master Z400 Service Manual
Testing
1. Disconnect the switch from the wiring harness.
2. Using a VOM or test light, check first to ensure there
is no continuity between either terminal, plunger out.
3. With the plunger pushed in, there should be
continuity between the terminals.

Seat Delay Module

Purpose
When operating the unit on rough terrain, if the operator
should come off the seat momentarily, the seat delay
module will temporarily delay the engine shutting down.
PICT-0198
Location
The seat delay module is located under the panel
assembly (Fig. 397).
DSC-2556
ELECTRICAL
Fig 397 PICT-0194
6
6-9