Toro Z Master Z400 Series Service Manual page 94

b. Install the four ground wires in the left rearmost
mounting bolt hole (Fig. 230).
Fig 230
3. Apply anti-seize compound to the engine shaft (Fig.
231).
Fig 231
Z Master Z400 Service Manual
4. Apply a thread-locking compound to the clutch
retainer bolt (Fig. 232).
PICT-0019c
5. Install the hydro pump drive pulley and the electric
PTO clutch with the bolt and spring washers. Torque
the bolt to 55 ft-lbs. (74.6 Nm) (Fig. 233).
PICT-0025c
ENGINE
Fig 232 PICT-0026c
Fig 233 PICT-0027c
5
5-7