b. With the choke knob in the full down position
(Fig. 245) and the choke linkage in the full open
position (left), tighten the cable clamp (Fig. 246).
Fig 245
Fig 246
Z Master Z400 Service Manual
18. Reconnect the throttle cable:
a. Reconnect the z-bend of the throttle cable to the
throttle linkage (Fig. 247).
PICT-0031c
b. Position the throttle control lever so that there is
approximately 1/2" (12.7mm) between the lever
and the full throttle position of the throttle slot
(Fig. 248).
PICT-0032c
ENGINE
Fig 247
PICT-0034c
Fig 248
PICT-0035c
5
5-11