Toro Z Master Z400 Series Service Manual page 173

MOWER DECKS/PTO
9. Remove the nut, washer, key, and pulley from the
spindle shaft (Fig. 461).
10. Remove the mower blade. Remove the 4 bolts that
mount the spindle to the deck housing (Fig. 462).
7
7-16
Fig 461 PICT-0385
Fig 462 PICT-0386
11. Remove spindle from mower deck (Fig. 463).
Fig 463
Mower Spindle Installation
Pro 100 Series
Reverse the order of mower spindle removal
Mower Spindle Removal
Estate Series and Pro 400 Series
This applies to removing any of the three mower
spindles. This procedure shows removing the right side
spindle.
1. Use a hoist or the Z-Stand to raise the front of the
mower deck.
2. Chock or block the drive wheels.
3. Disconnect the battery negative cable.
4. Lower the mower deck to the lowest position.
Z Master Z400 Service Manual
PICT-0387