ENGINE
17. Connect the three ground wires located at the right
hand engine lift point (Fig. 327). Reinstall the engine
lift bracket.
18. Plug in the magneto and charging circuit wire
harness (Fig. 328).
5
5-32
Fig 327
PICT-0328
Fig 328
PICT-0327
19. Connect the green oil sending wire to the oil
pressure switch (Fig. 329).
Fig 329
20. Reconnecting the choke cable:
a. Position the choke knob in the full down position
(Fig. 330).
Fig 330
Z Master Z400 Service Manual
PICT-0325
PICT-0296