CHASSIS
2. Remove the two bolts and washers retaining the
lever assembly to the control arm shaft (Fig. 141).
3
3. Remove the cotter pin and clevis pin securing the
adjustable yoke of the neutral return bolt (Fig. 142).
3-32
Fig 141
PICT-0072
Fig 142
PICT-0073
4. Disconnect the motion control dampener from the
motion control assembly (Fig. 143).
Fig 143
5. Remove the bolt and nut that retaining the ball joint
to the motion control shaft (Fig. 144).
Fig 144
Z Master Z400 Service Manual
PICT-0074
PICT-0076