Toro Z Master Z400 Series Service Manual page 76

5. Install a wheel hub puller to the wheel hub. Place an
impact wrench onto the puller and remove the wheel
hub (Fig. 182).
Fig 182
Note: Toro Wheel Hub Puller, P/N TOR 4097, is
available through SPX (formerly OTC)
1-800-533-0492.
6. Place a drain pan under wheel motor.
7. Clean any dirt or debris away from the hydraulic line
fittings. Remove the hydraulic lines (Fig. 183).
Note: Make sure to cap the fittings and hoses
to prevent dirt from entering the hydraulic
system.
Fig 183
Z Master Z400 Service Manual
HYDRAULIC SYSTEM
8. Remove the wheel motor bolts, lock washers,
spacers and nuts (Fig. 184).
PICT-0003a
9. Remove the wheel motor (Fig. 185).
10. For service on the wheel motor refer to the Parker
Ross Service Manual, Form #492-4753.
PICT-0004a
Fig 184 PICT-0005a
Fig 185 PICT-0006a
4
4-11