Manual Overwriting Of Channels By Using The Faders (Play Mode) - GLP SCAN OPERATOR FX User Manual

SCAN OPERATOR FX

3.18 Manual overwriting of channels by using the Faders (Play mode)

You can overwrite Play mode channels by means of the Fader. This function is
meant, to do smaller changes in live enterprise without previously programming.
In order to overwrite channels, you proceed as follows:
1. You are in Play mode
2. Select desired fixtures with appropriate Fixture keys. Several fixtures can be
selected at the same time for treatment.
3. Adjust the desired DMX values (0 to 255) with the Faders.
4. If necessary press the PAGE key, in order to be able to change the further 8
DMX channels (channels 9-16).
Repeat the steps 2-4 until the all DMX of values correspond to your desire.
5. The accomplished changes have priority before, for example, active overlay
scenes and remain to exist, until you waive the changes through pressing the
RELEASES key again.
44
(V1.3)
GLP German Light Products