Back View; Install Into A 19" Rack - GLP SCAN OPERATOR FX User Manual

SCAN OPERATOR FX
24. Chaser keys

Back view

1.2
1. Audio IN
2. MIDI IN
3. DMX Out
4. DMX In
5. DC Input
6. Power

Install into a 19" rack

1.3
The unit is easy to install in a 19" rack - you only need to remove the plastic border, that
is attached to the Scanoperator in delivery condition. To do this, you have to remove the
10 screws from the plastic parts. Afterwarts you can pull away the single plastic
peelings up, down and to the side. Then use the mounting brackets which have been
shippied with the controller, to install it into the 19" rack.
10
fixtures and generates randomized samples.
Here you access the 6 chasers.
Cinch-socket to connect to an audio source.
Socket to receive MIDI data
3 pol. DMX- exit.
3 pol. DMX- entry .
DC +12V, 500mA min. (please pay attention to ...).
On/Off Switch
(V1.3)
GLP German Light Products