Configuring Autostart Desklock - GLP SCAN OPERATOR FX User Manual

SCAN OPERATOR FX
Important:
4. The changes are not automatically durably stored but they are directly active.
Therefore it is necessary that you confirm the changes for durable storing once
with the RECORD or the SETUP key.
5. Press the SETUP key for 3 seconds, to leave the Setup mode again.
.

3.16.2 Configuring Autostart Desklock

In order to activate the Desklock mode automatically when switching on of the
equipment on, you proceed as follows:
6. Activate Setup mode (SETUP key).
7. Now select "Autostart" in the menu of Setup mode (shortened by "Autostrt")
8. Now use the Tilt Encoder, in order to activate and/or deactivate the Autostart
function.
Important:
9. The changes are not automatically durably stored but they are directly active.
Therefore it is necessary that you confirm the changes for durable storing once
with the RECORD or the SETUP key.
10. Press the SETUP key for 3 seconds, to leave the Setup mode again.
40
(V1.3)
GLP German Light Products