Delete A Step In Chaser - GLP SCAN OPERATOR FX User Manual

SCAN OPERATOR FX
4. Press the BANK UP/DOWN key to go to the desired step.
Example:
Should a scene between the Chaserstep 3 and 4 be inserted, jump forwards until
the display shows "step 003".
Reference:
At the upper and lower end the step number jumps back to the other end of the
chaser. Therefore the last reserved step of the chaser is at step "0" again.
Reference:
The 0-th step does not exist; it only serves as a dummy step for editing the
Chaser. You can select it, in order to insert a scene or a bank at position "1".
5. In order to insert a scene or a bank behind the new position now, you press
the TAPSYNC key again, in order to return to the previous screen.
Reference:
With the TAPSYNC key you change between the screen of the Chaserstep and
the bank/scene.
6. For inserting the scene you proceed, as described further above.

3.7.4 Delete a step in Chaser

The deletion of a Chaserstep is only possible in the Chaserstep announcement, since
you can choose the step that you want to delete only here.
GLP • German Light Products
23
(V1.3)