Copying Fixture; Copying Complete Bank - GLP SCAN OPERATOR FX User Manual

4. Press the BANK UP/DOWN key to call up the desired bank which the scene
shall be copied to.
5. Press the RECORDS key.
6. Press the scenes key which you want to copy the chosen scene to. As
confirmation you will receive the message "Scene Saved".

3.6.4 Copying Fixture

This function allows you to transfer the current DMX values from one fixture to
another in PROGRAM mode (COPY).
1. Keep the Fixture key, which you want to copy, pressed
2. While you keep the first Fixture key pressed, press the desired second Fixture
key on which you want to copy.
3. In the display the signature "COPY" appears short as confirmation.
4. For example you can also press further Fixture keys, without releasing first, in
order to copy the same settings on further Fixtures.
Caution:
These changes take place in the buffer only. If you want to store the new scene,
then proceed as described above (RECORD and then scene key)!

3.6.5 Copying complete Bank

1. Activate PROGRAM mode (PROGRAM Key).
2. Press the BANK UP/DOWN key to call up the desired bank you would like to
copy.
3. Press the RECORD key.
4. Press the BANK UP/DOWN key until you reached the bank you would like to
copy to.
5. Press the MUSIC/BANK COPY key. As memory confirmation you receive the
message "BANK COPY".
GLP • German Light Products
(V1.3)
SCAN OPERATOR FX
19