Hide thumbs Also See for impression X5 IP Bar 1000:

Advertisement

Quick Links

X5 IP Bar 1000
Document revision: 20230928-01
Fixture software version 1.1.3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the impression X5 IP Bar 1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GLP impression X5 IP Bar 1000

  • Page 1 X5 IP Bar 1000 Document revision: 20230928-01 Fixture software version 1.1.3...
  • Page 2 GLP® impression X5 IP Bar 1000 User Manual © 2023 German Light Products GmbH. All rights reserved. The marks ‘GLP’ and ‘German Light Products’ are trademarks registered as the property of German Light Products GmbH in Germany, in the United States of America and in other countries.
  • Page 3: Table Of Contents

    Safety ......................5 Key to symbols ..................5 GLP Service and Support ..............6 Avoiding damage to the fixture ............6 impression X5 IP Bar 1000 overview ............7 Features ....................... 8 Control options ..................8 Powering on ..................8 Tilt ......................
  • Page 4 Hibernation ..................23 Load User Settings ................23 Information ..................23 Manual Control ................... 23 Manual DMX ..................24 Service ....................24 Advanced Service ................24 Load Factory Defaults ................ 25 Factory Menu ..................25 Control panel ................... 27 Default information screen ..............27 Using the control panel ..............
  • Page 5: Safety

    If you have any doubts or questions about how to use the GLP® impression X5 IP Bar 1000 lighting fixture safely, contact your GLP supplier for assistance. Your GLP supplier will be happy to help.
  • Page 6: Glp Service And Support

    X5 IP Bar 1000 The impression X5 IP Bar 1000 is intended for use by experienced professionals with the knowledge and skills to set up, operate, and maintain high-powered, remotely controlled lighting equipment safely and efficiently. These operations require expertise that may not be provided in this manual.
  • Page 7: Impression X5 Ip Bar 1000 Overview

    German Light Products® X5 IP Bar 1000 2. impression X5 IP Bar 1000 overview Figure 1. impression X5 Bar IP 1000 overview A – Head B – Air vent (x 4) C – Alignment pins button D – AC mains power IN (Neutrik powerCON TRUE1 TOP) E –...
  • Page 8: Features

    GLP (such as an asymmetric beamshaper filter) to be installed in seconds without the use of tools. Control options The impression X5 IP Bar 1000 is compatible with DMX 512 and RDM control protocols. Other control options via Ethernet are currently in preparation for inclusion in a future firmware release.
  • Page 9: Fixture Performance And Speed Options

    (see ‘Performance modes’ on page 20). Zoom The impression X5 IP Bar 1000 has motorized zoom control that lets you vary the beam angle from spot to flood as the DMX value increases. You can adjust the speed (and noise level) of zoom movement, as well as the speed of all other mechanical effects, by selecting from three different performance options (see ‘Performance modes’...
  • Page 10: Color Mixing

    ‘Color Mix modes’ on page 16. iQ.Gamut iQ.Gamut is a new LED calibration technology from GLP that defines the color gamut for the color mix channels. You can select one of a range of calibrated iQ.Gamuts for the fixture to work within. This feature can be useful if you want to reproduce correct colors or avoid TV camera clipping.
  • Page 11: White Point

    The white point is the default white that is obtained when the shutter is opened. The impression X5 IP Bar 1000 offers a choice of fixed white points in RGB Color Mix Mode, allowing convenient use in different environments. For details of setting the white point, see ‘White Point’...
  • Page 12: Color Quality Control (Cqc)

    Main module and Sub modules. Color wheel The impression X5 IP Bar 1000 features a virtual color wheel channel that gives quick access to a wide range of LEE-referenced colors in all three Color Mix modes. Color wheel color presets are always mixed with the best available spectrum.
  • Page 13: Tungsten Simulation

    German Light Products® X5 IP Bar 1000 Besides static color presets, the color wheel channel also offers continuous color scrolling through HSI colors. When set to HSI Scroll, the fixture runs through saturated HSI colors with variable speed from slow to fast. The crossfade time of a color change is relative to the speed: at slow speeds colors crossfade smoothly and at fast speeds colors snap.
  • Page 14: Dimmer

    See ‘Dimming curves’ on page 19. Pattern control The impression X5 IP Bar 1000 offers a wide range of static and dynamic pre- programmed FX patterns on the Sub modules. The Sub module color control channels define the color of the pattern effects.
  • Page 15: Special/Control Dmx Channel

    The Fixture Total Number (or Fixture Quantity) and Fixture Position channels let you set up FX pattern chases and synchronized pattern action in multiple fixtures when you activate dynamic FX. The impression X5 IP Bar 1000 can manage patterns in fixture groups containing up to 255 fixtures.
  • Page 16: Fixture Settings

    X5 IP Bar 1000 4. Fixture Settings The settings described in this chapter let you customize the impression X5 IP Bar 1000. Settings can be available in the control panel, via DMX and/or via RDM. Color Mix modes The Color Mix Mode setting offers three different options for color mixing:...
  • Page 17 German Light Products® X5 IP Bar 1000 Note: The HO and HQ CQC options are not available in RGBL Mode. When the Color Mix Mode is set to RGBL, the different DMX Modes have the following functionality: ● Mode 1 – Basic Main Layer: RGBL control of all pixels as one group with individual Lime control.
  • Page 18: White Point

    The white point is the default white that is obtained when the shutter is opened. The impression X5 IP Bar 1000 offers a choice of fixed white points in RGB Color Mix Mode, allowing convenient use in different environments. The following fixed white points (color temperatures) are available: ●...
  • Page 19: Dimming Curves

    German Light Products® X5 IP Bar 1000 Dimming curves The electronic dimming effect provides smooth 16-bit dimming of the Main module and Sub modules. The following three dimming curves are available: Figure 2. Dimming curves ● The Linear setting gives a dimming curve that the eye perceives as linear. ●...
  • Page 20: Sub Module Mode / Sub Fixture Mode

    Sub module mode / Sub fixture mode The impression X5 IP Bar 1000 offers two options for controlling the Main module and Sub modules: ● Normal – In this mode, all Sub module channels are subordinate to the Main module channel group.
  • Page 21: Pwm Frequency

    German Light Products® X5 IP Bar 1000 PWM frequency This setting lets you select between different LED PWM frequencies for different applications and adjust frequencies to give the best results at different camera shutter frequencies. Changing the PWM frequency can improve dimming performance or help avoid flicker and beat frequencies in video images.
  • Page 22: Tilt Invert

    X5 IP Bar 1000 If the fixture is set to Scene (Stand-alone) and if a stand-alone scene has been stored in its memory using the Capture DMX Values command, it will display its stand-alone scene at all times when it is powered on but not receiving a DMX signal.
  • Page 23: Display Orientation

    German Light Products® X5 IP Bar 1000 Display Orientation Lets you select Normal, Upside-down or Auto control panel display orientation. If Display Orientation is set to Auto, changing the display orientation by pressing UP and DOWN at the same time will only change the display orientation until the next power cycle.
  • Page 24: Manual Dmx

    ● Live Diagnostic: Calls up an overview of all main fixture information, signal quality and settings. This can be helpful while troubleshooting or talking to GLP Service. ● iQ.Service Connect: Wakes up the integrated GLP iQ.Mesh Module for 5 minutes and enables connectivity to the GLP iQ.Service App.
  • Page 25: Load Factory Defaults

    X5 series fixtures. This means that a firmware push carried out by an impression X5 IP Bar 1000 will also push its firmware to other impression X5 fixtures such as impression X5, impression X5 Compact, impression X5 Bar 1000 etc.
  • Page 26 X5 IP Bar 1000 Factory Menu is visible as the last item in the main menu. The Factory Menu will remain available until the next power cycle. While the Factory Menu is enabled, all display timeouts are disabled to make working on the fixture easier and a Factory symbol is visible in the main screen.
  • Page 27: Control Panel

    German Light Products® X5 IP Bar 1000 5. Control panel Warning! DMX control is disabled when the control menus are active. Be prepared for the head to move as soon as you exit the control menus. The control panel and backlit graphic LCD display with self-charging battery allow you to change fixture settings, view readouts and use utilities quickly and intuitively, even when the fixture is disconnected from power.
  • Page 28 X5 IP Bar 1000 See Figure 3. The top line of the default information screen consists of, from left to right: ● Main CPU firmware version ● DMX Mode The center of the screen shows the following information: ● Signal source.
  • Page 29: Using The Control Panel

    German Light Products® X5 IP Bar 1000 Using the control panel The four control panel buttons under the display have the following functions. In the main screen: QUICK MENU – Activates the Quick Menu UP/DOWN – Press three times to open the live diagnostic tool MENU –...
  • Page 30: Live Diagnostics

    No Signal setting – see ‘No signal’ on page 21). Service and maintenance See the separate impression X5 IP Bar 1000 Quick Start and Safety Manual supplied with the fixture and available for download from www.glp.de for information on service and maintenance.
  • Page 31: Setting Up The Control Protocol

    In the Protocol Setup → Data In menu, set the control protocol to iQ.Mesh. LumenRadio CRMX A LumenRadio CRMX module is installed as standard at the impression X5 IP Bar 1000’s FPO port when the fixture is supplied. If you want to control the fixture via LumenRadio CRMX, open the menus in the fixture’s control panel and make the following adjustments: Open the menus in the fixture’s control panel.
  • Page 32: Control Menus

    Resets the entire fixture (takes a Reset All few seconds). Calls up overview of all main Live Diagnostic fixture information, signal quality and settings. Enables connectivity to the GLP iQ.Service Connect >>>Connect<<< iQ.Service App for 5 minutes. User Setting >>>Confirm<<< Preset 1 User Setting >>>Confirm<<<...
  • Page 33: Main Menu

    German Light Products® X5 IP Bar 1000 Main menu The following menus and commands are available in the impression X5 IP Bar 1000 control panel. Menus Notes DMX Address Set fixture’s DMX start address. Highest possible 001-512 address depends on control mode.
  • Page 34 X5 IP Bar 1000 Linear Linear dimming curve Soft (square law) dimming Dimmer Soft curve Curve Finer dimming control at S-Curve low and high intensity Fan speed temperature- Regulated regulated High Fan speed constant high Fan speed constant Fan Mode...
  • Page 35 Shows any stored errors Show temperature Shows fixture temperature Shows current cooling fan Show fan status status Show controllers info Shows controllers info Shows current GLP Show iQ.Mesh status iQ.Mesh status Shows LED calibration Show LED calibration information Shows total device hours (non-resettable),...
  • Page 36 Service Shows overview of fixture Live diagnostic information Enables connectivity to iQ.Service Connect >>> Connect <<< the GLP iQ.Service app. Run test sequence of all Test All effects including tilt. Stop with BACK. Run test sequence of tilt Test Tilt only.
  • Page 37 German Light Products® X5 IP Bar 1000 Normal operation Disable tilt and display Service Mode timeouts (exit by cycling power off and on.) Create custom job offsets in home positions of all Tilt Job offsets effects. Default offset = 0 Zoom Note: This function is not fixture calibration!
  • Page 38: Error Messages

    GLP service agent. 9. Pixel layout The impression X5 IP Bar 1000 pixels are located as shown above, seen from the front of the fixture with tilt at >50% and Pixel mirror → y-mirror set to Off.
  • Page 39: Dmx Control Modes Overview

    X5 IP Bar 1000 10. DMX control modes overview The following DMX control modes are available in the impression X5 IP Bar 1000. DMX channels from 1 to 7 have the same functionality in all the DMX control modes. DMX Mode 1: Basic...
  • Page 40 X5 IP Bar 1000 Mode 2 DMX Mode 2: Normal (default) Normal 33 DMX channels Normal DMX Mode is split into a Main Tilt Module and a Sub Module. Intensity The Main Module gives control of the Shutter main functions, as in Basic DMX Zoom Mode.
  • Page 41 German Light Products® X5 IP Bar 1000 DMX Mode 3: Segments Mode 3 Segment 48 DMX channels Segment DMX Mode is split into a Tilt Main Module and a Sub Module. The Main Module gives control of the Intensity main functions, as in Basic DMX Shutter Mode.
  • Page 42 X5 IP Bar 1000 Mode 4 DMX Mode 4: Multipix Advanced Multipix Advanced 84 DMX Channels Multipix Advanced DMX Mode is split Tilt into a Main Module and a Sub Intensity Module. Shutter The Main Module gives control of the...
  • Page 43 German Light Products® X5 IP Bar 1000 Mode 5 DMX Mode 5: Multipix Compressed Multipix Compressed RGB 63 DMX Channels Tilt MultiPix Compressed RGB DMX Mode Intensity gives control of the main functions, as in Basic DMX Mode, plus RGB color Shutter control of each individual pixel.
  • Page 44 X5 IP Bar 1000 Mode 6 DMX Mode 6: Multipix Compressed Multipix Compressed RGBL RGBL 81 DMX Channels Tilt MultiPix Compressed RGBL DMX Mode Intensity gives control of the main functions, as in Basic DMX Mode, plus RGBL color...
  • Page 45: Dmx Control Channel Layout

    German Light Products® X5 IP Bar 1000 11. DMX control channel layout In the following DMX channel layout tables: ● Default settings are indicated with bold type. ● Where commands are marked (3 sec.), you must send that DMX value continuously for 3 seconds (or other duration if indicated in the table) to apply the command.
  • Page 46: Dmx Mode 1: Basic

    DMX MODE 1 impression X5 IP Bar 1000 DMX Mode 1: Basic 20 DMX Channels Basic control Default Fade Channel Command range Percent Tilt coarse Tilt back → front 65535 32768 Fade Tilt fine Intensity coarse Intensity 0 → 100%...
  • Page 47 German Light Products® DMX MODE 1 impression X5 IP Bar 1000 Basic control (continued) Open Filter 004 (Medium Bastard Amber) Filter 019 (Fire) Filter 025 (Sunset Red) Filter 026 (Bright Red) Filter 036 (Medium Pink) Filter 049 (Medium Purple) 10.6 Filter 058 (Lavender) 11.0...
  • Page 48 DMX MODE 1 impression X5 IP Bar 1000 Basic control (continued) Filter 248 (Half Minus Green) 68.6 69.4 Filter 281 (Three Quarter C.T. Blue) 69.8 70.6 Filter 285 (Three Qrtr. C.T. Orange) 71.0 71.8 Filter 352 (Glacier Blue) 72.2 72.9...
  • Page 49: Dmx Mode 2: Normal (Default Dmx Mode)

    German Light Products® DMX MODE 2 impression X5 IP Bar 1000 DMX Mode 2: Normal (default DMX mode) 33 DMX Channels Default Fade Channel Command range Percent Main Module: basic control Tilt coarse Tilt back → front 65535 32768 Fade...
  • Page 50 DMX MODE 2 impression X5 IP Bar 1000 Main Module: basic control (continued) Filter 089 (Moss Green) 14.5 15.3 Filter 090 (Dark Yellow Green) 15.7 16.5 Filter 102 (Light Amber) 16.9 17.6 Filter 103 (Straw) 18.0 18.8 Filter 106 (Primary Red) 19.2...
  • Page 51 German Light Products® DMX MODE 2 impression X5 IP Bar 1000 Main Module: basic control (continued) HSI scroll, stop at first color 79.2 80.0 Snap Color wheel HSI scroll slow → fast 80.4 98.8 Fade ctd. (continued) HSI scroll, stop at current color 99.2...
  • Page 52 DMX MODE 2 impression X5 IP Bar 1000 Main Module: basic control (continued) Main Module and Sub Module HTP (highest value takes priority) Main only (Main Module color takes priority) Sub only (Sub Module color takes 11.4 priority) Main and Sub additive (Sub Module color value added to 11.8...
  • Page 53 German Light Products® DMX MODE 2 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Static Pattern 12 12.5 12.9 Static Pattern 13 13.3 13.7 Static Pattern 14 14.1 14.5 Static Pattern 15 14.9 15.3 Static Pattern 16 15.7...
  • Page 54 DMX MODE 2 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Dynamic Pattern 08 55.7 56.1 Dynamic Pattern 09 56.5 56.9 Dynamic Pattern 10 57.3 57.6 Dynamic Pattern 11 58.0 58.4 Dynamic Pattern 12 58.8 59.2 Dynamic Pattern 13 59.6...
  • Page 55 German Light Products® DMX MODE 2 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Stop (first pattern step) CW fast → slow 24.7 (run pattern step 1 → n) Stop at current position 25.1 25.9 CCW slow → fast 26.3...
  • Page 56 DMX MODE 2 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Pattern Step 49 87.8 88.2 Pattern Step 50 88.6 89.0 Pattern Step 51 89.4 89.8 Pattern Step 52 90.2 90.6 Pattern Step 53 91.0 91.4 Pattern Step 54 91.8...
  • Page 57: Dmx Mode 3: Segments

    German Light Products® DMX MODE 3 impression X5 IP Bar 1000 DMX Mode 3: Segments 48 DMX Channels Default Fade Channel Command range Percent Main Module: basic control Tilt coarse Tilt back → front 65535 32768 Fade Tilt fine Intensity coarse Intensity 0 →...
  • Page 58 DMX MODE 3 impression X5 IP Bar 1000 Main Module: basic control (continued) Open Filter 004 (Medium Bastard Amber) Filter 019 (Fire) Filter 025 (Sunset Red) Filter 026 (Bright Red) Filter 036 (Medium Pink) Filter 049 (Medium Purple) 10.6 Filter 058 (Lavender) 11.0...
  • Page 59 German Light Products® DMX MODE 3 impression X5 IP Bar 1000 Main Module: basic control (continued) Filter 206 (Quarter C.T. Orange) 65.1 65.9 Filter 219 (Fluorescent Green) 66.3 67.1 Filter 247 (Filter Minus Green) 67.5 68.2 Filter 248 (Half Minus Green) 68.6...
  • Page 60 DMX MODE 3 impression X5 IP Bar 1000 Main Module: basic control (continued) FX Tungsten 1200W/240V 70.6 74.1 FX Tungsten 2000W/230V 74.5 78.0 Tungsten effect FX Tungsten 2500W/230V 78.4 82.0 Snap ctd. (continued) FX Tungsten 5000W/230V 82.4 85.9 No function (off) 86.3...
  • Page 61 German Light Products® DMX MODE 3 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Off (all pixels active) Static Pattern 01 Static Pattern 02 Static Pattern 03 Static Pattern 04 Static Pattern 05 Static Pattern 06 Static Pattern 07...
  • Page 62 DMX MODE 3 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Static Pattern 53 44.7 45.1 Static Pattern 54 45.5 45.9 Static Pattern 55 46.3 46.7 Static Pattern 56 47.1 47.5 Static Pattern 57 47.8 48.2 Static Pattern 58 48.6...
  • Page 63 German Light Products® DMX MODE 3 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Dynamic Pattern 48 87.1 87.5 Dynamic Pattern 49 87.8 88.2 Dynamic Pattern 50 88.6 89.0 Special Pattern 01 89.4 89.8 Special Pattern 02 90.2...
  • Page 64 DMX MODE 3 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Pattern Step 35 76.9 77.3 Pattern Step 36 77.6 78.0 Pattern Step 37 78.4 78.8 Pattern Step 41 81.6 82.0 Pattern Step 42 82.4 82.7 Pattern Step 43 83.1...
  • Page 65 German Light Products® DMX MODE 3 impression X5 IP Bar 1000 Sub Module: second layer control (continued) 1 fixture in total Fixture total 2 fixtures in total Snap number 3…254 fixtures in total 99.6 255 fixtures in total Fixture in position 1...
  • Page 66: Dmx Mode 4: Multipix Advanced

    DMX MODE 4 impression X5 IP Bar 1000 DMX Mode 4: MultiPix Advanced 84 DMX Channels Default Fade Channel Command range Percent Main Module: basic control Tilt coarse Tilt back → front 65535 32768 Fade Tilt fine Intensity coarse Intensity 0 →...
  • Page 67 German Light Products® DMX MODE 4 impression X5 IP Bar 1000 Main Module: basic control (continued) Filter 089 (Moss Green) 14.5 15.3 Filter 090 (Dark Yellow Green) 15.7 16.5 Filter 102 (Light Amber) 16.9 17.6 Filter 103 (Straw) 18.0 18.8 Filter 106 (Primary Red) 19.2...
  • Page 68 DMX MODE 4 impression X5 IP Bar 1000 Main Module: basic control (continued) HSI scroll, stop at first color 79.2 80.0 Snap Color wheel HSI scroll slow → fast 80.4 98.8 Fade ctd. (continued) HSI scroll, stop at current color 99.2...
  • Page 69 German Light Products® DMX MODE 4 impression X5 IP Bar 1000 Main Module: basic control (continued) Main Module and Sub Module HTP (highest value takes priority) Main only (Main Module color takes priority) Sub only (Sub Module color takes 11.4...
  • Page 70 DMX MODE 4 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Static Pattern 14 14.1 14.5 Static Pattern 15 14.9 15.3 Static Pattern 16 15.7 16.1 Static Pattern 17 20.4 16.9 Static Pattern 18 17.3 17.6 Static Pattern 19 18.0...
  • Page 71 German Light Products® DMX MODE 4 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Dynamic Pattern 11 58.0 58.4 Dynamic Pattern 12 58.8 59.2 Dynamic Pattern 13 59.6 60.0 Dynamic Pattern 14 60.4 60.8 Dynamic Pattern 15 61.2...
  • Page 72 DMX MODE 4 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Stop (first pattern step) CW fast → slow 24.7 (run pattern step 1 → n) Stop at current position 25.1 25.9 CCW slow → fast 26.3...
  • Page 73 German Light Products® DMX MODE 4 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Pattern Step 51 89.4 89.8 Pattern Step 52 90.2 90.6 Pattern Step 53 91.0 91.4 Pattern Step 54 91.8 92.2 Pattern Step 55 92.5...
  • Page 74 DMX MODE 4 impression X5 IP Bar 1000 Sub Module: second layer control (continued) Green, pixel 04 Intensity 0 → 100% Fade Blue, pixel 04 Intensity 0 → 100% Fade Red, pixel 05 Intensity 0 → 100% Fade Green, pixel 05 Intensity 0 →...
  • Page 75: Dmx Mode 5: Multipix Compressed Rgb

    German Light Products® DMX MODE 5 impression X5 IP Bar 1000 DMX Mode 5: MultiPix Compressed RGB 63 DMX Channels Default Fade Channel Command range Percent Main module: basic control Tilt coarse Tilt back → front 65535 32768 Fade Tilt fine Intensity coarse Intensity 0 →...
  • Page 76 DMX MODE 5 impression X5 IP Bar 1000 Main module: basic control (continued) Red, pixel 07 Intensity 0 → 100% Fade Green, pixel 07 Intensity 0 → 100% Fade Blue, pixel 07 Intensity 0 → 100% Fade Red, pixel 08 Intensity 0 →...
  • Page 77: Dmx Mode 6: Multipix Compressed Rgbl

    German Light Products® DMX MODE 6 impression X5 IP Bar 1000 DMX Mode 6: MultiPix Compressed RGBL 81 DMX Channels Default Fade Channel Command range Percent Main module: basic control Tilt coarse Tilt back → front 65535 32768 Fade Tilt fine Intensity coarse Intensity 0 →...
  • Page 78 DMX MODE 6 impression X5 IP Bar 1000 Main module: basic control (continued) 30 Red, pixel 06 Intensity 0 → 100% 31 Green, pixel 06 Intensity 0 → 100% 32 Blue, pixel 06 Intensity 0 → 100% 33 Lime, pixel 06 Intensity 0 →...
  • Page 79 German Light Products® impression X5 IP Bar 1000 Control / Settings channel The Control / Settings commands listed below are available on Channel 7 in every DMX mode. Default Channel Command range Percent Fade No function iQ.Service connect No function Dimmer curve: Soft (square) (3 sec.)
  • Page 80 X5 IP Bar 1000 Subfixture mode: Normal (3 sec.) 58.8 59.2 Subfixture mode: Independent (3 59.6 60.0 sec.) No function 60.4 64.7 Color mode: RGB [1] (3 sec.) 65.1 65.5 Color mode: RGBL [2] (3 sec.) 77.6 66.3 Color mode: x:y [3] (3 sec.)
  • Page 81: Key To Conversion Of X And Y Coordinates

    German Light Products® impression X5 IP Bar 1000 12. Key to conversion of x and y coordinates The following formulas are used when converting DMX values to x/y coordinates on the RGB and RGBL color mixing channels: Rev. 20230928-01...
  • Page 82: Color Wheel Specifications

    X5 IP Bar 1000 13. Color wheel specifications The following table gives the color gamut co-ordinates of the color presets available on the color wheel effect. Filter 004, Medium Bastard Amber 0.37;0.335 Filter 019, Fire 0.664;0.31 Filter 025, Sunset Red 0.566;0.359...
  • Page 83 German Light Products® impression X5 IP Bar 1000 Filter 157, Pink 0.457;0.272 Filter 162, Bastard Amber 0.348;0.328 Filter 164, Flame Red 0.659;0.302 Filter 165, Daylight Blue 0.159;0.158 Filter 169, Lilac Tint 0.294;0.281 Filter 170, Deep Lavender 0.278;0.211 Filter 172, Lagoon Blue 0.141;0.22...

This manual is also suitable for:

Impression x5 ip bar7880

Table of Contents