Manual Overwriting Channels By Using The Faders (Play Mode) - GLP SCAN OPERATOR FX II User Manual

4.18

Manual overwriting channels by using the Faders (Play mode)

You can overwrite Play mode channels by means of the Fader. This function is meant,
to do smaller changes in live performance.
In order to overwrite channels, you proceed as follows:
1. You are in Play mode
2. Select desired fixtures with appropriate Fixture keys. Several fixtures can
be selected at the same time for configuration.
3. Adjust the desired DMX values (0 to 255) with the Faders.
4. If necessary press the PAGE key, in order to be able to change the further
8 DMX channels (channels 9-16).
Repeat the steps 2-4 until the all DMX of values correspond to your desire.
5. The accomplished changes have priority before, for example, active
overlay scenes and remain to exist, until you waive the changes through
pressing the RELEASE button again.
46/57