Play A Chaser With A Music-Beat; Freeze Function - GLP SCAN OPERATOR FX User Manual

SCAN OPERATOR FX

3.19.3 Play a Chaser with a music-beat

1. Select the desired Chaser of 1-6. By renewed pressing of the Chaser
key you deactivate it again.
Reference:
Several Chasers can be selected at the same time. These run off then
successively.
1. Press the MUSIC/BANKCOPY key to call up music function. The music
LED shines.
2. Select, with the speed and Fade time faders the desired expiration
effect..
Reference:
With the TAPSYNC/MANUAL GO key you can move on to the next
occupied scene of the bank.
With it the scene can be released manually during a calm phase of a piece
of music

3.20 Freeze function

The Freeze function serves to freeze the DMX expenditure presently/immediately
and to avoid a step up of the scenes. This is useful, if you want stop the entire
movement briefly, and to let it run again after a short time like before.
All parameters are maintained. So the Autoclock, for example, is also maintained.
So that after a Freeze it keeps running to the same beat, suitable to the music.
1. This function is available only in Play mode
2. For activating the Freeze mode, you press the FREEZE key. Renewed
pressing deactivates the Freeze function again.
46
(V1.3)
GLP German Light Products