Call Up A Chaser (Play Mode); Call Up A Chaser Manually; Play A Chaser With A Auto-Beat - GLP SCAN OPERATOR FX User Manual

3.19 Call up a Chaser (Play mode)

Reference:
You have to have programmed the Chaser before in order to call it up. Empty
chasers can not be started.

3.19.1 Call up a chaser manually

1. Select the desired Chaser 1-6. By renewed pressing of the chaser key
you deactivate it again.
2. Make sure that auto-beat and music clock are deactivated.
3. A new started chaser is loaded directly and begins with its first step.
Reference:
Several chasers can also be selected at the same time. These run off then
successively. In the display the up-to-date running chaser appears at the
end of the first line.
4. With the Tapsync key you can move on to the next step now.

3.19.2 Play a Chaser with a Auto-beat

1. Select at least one of the desired chasers 1-6. By renewed pressing of
the chaser key you deactivate a chaser again.
Reference:
Several Chasers can be selected at the same time. These run off then
successively.
2. Press the AUTO key to call up this function. Auto LED shines.
3. Select the desired playback time with the speed and Fade time faders
and/or with the TAPSYNC/MANUAL GO key.
GLP • German Light Products
(V1.3)
SCAN OPERATOR FX
45