GLP SCAN OPERATOR FX User Manual page 8

SCAN OPERATOR FX
1. Fixture keys (1-12)
12 Fixtures (Lamps) of each 16 DMX channels are to adjust over Fader. The currently
selected fixtures will be shown by their belonging LED.
Fixture
1
2
3
4
5
6
7
8
9
10
11
12
Press the Fixtures key, to control the respective lamp over the appropriate Faders. The
LED next to the Fixture keys shows the selected lamps.
2. Scene keys
3. Fader
4. Page Select key
5. Desklamp
connection
6. Overlay keys 1-6
7. LCD display
8. Bank keys
(UP/DOWN)
8
DMX channels
1-16
17-32
33-48
49-64
65-80
81-96
97-112
113-128
129-144
145-160
161-176
177-192
To access or to save scenes – press scenes key
Here you can adjust the DMX data of the respective channel.
Here you can switch the function of the Faders between
channels 1-8 (page A) or 9-16 (Page B).One LED shows the
current state.
3 pin XLR connector for 12V Desklamp (max. 500mA).
Here you access the 6 Overlay scenes.
Shows all current informations.
Here you can switch between the banks 1-30. These keys are
also there to change the start angle in the effect editor
(V1.3)
Fixture selection / LED
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
GLP German Light Products