Copying The Data Between Scanoperator 12/Pt/Fx; Connecting The Controllers - GLP SCAN OPERATOR FX User Manual

5. The scenes keys have the function of a Flashkey in this mode. As long
as one of these keys are pressed, this channel will be sent with a value
of "255" This is then indicated in the display by the text "Flash".
Reference:
The channels 9 and 10 do not have Flash key.

3.23 copying the data between Scanoperator 12/PT/FX

It is possible to transfer all memory contents of any Scanoperator FX to another
one of the Scanoperator series (exception: Scanoperator pro). Scanoperator 12
Advanced, Scanoperator PT Advanced and Scanoperator FX are compatible
among themselves.
First in addition both devices must be switched off.

3.23.1 Connecting the Controllers

Use a normal DMX cable, in order to connect the two devices in the switched off
condition. The 3pol XLR plug of the cable is attached to the DMX Output
(connection 3) of the sending unit. The 3pol XLR socket is connected with the
receiving set (connection 4).
Guarantee that except this cable no further Midi or DMX cable is attached.
GLP • German Light Products
(V1.3)
SCAN OPERATOR FX
51