Operation Mode; Play Mode; Program Mode; Setup Mode - GLP SCAN OPERATOR FX User Manual

SCAN OPERATOR FX

Operation mode

3.2
All together there are 4 different operation modes in which different functions are
available. When you turn on the unit, you start directly in the play mode.
The current mode is always shown in the first line in the display!

3.2.1 Play Mode

This mode is there to play the scenes, banks and chasers you have programmed
before. There are different ways to let the banks and chasers tap automatically. The
Desk also reacts to given MIDI commands.

3.2.2 Program mode

It is possible to program the whole scenes, effects, banks, chasers, overlays and
blackouts in this mode.

3.2.3 Setup Mode

The Setup mode is used to configure the scanoperator. You can configure the midi
channel, the midi control mode (between synthesizer and keyboard), reverse DMX
channels, turn on the Fade-time function for each channel and alter the assignment of
the Pan/Tilt wheels.
The Pan/Tilt wheels can be assigned per fixture to one channel (1 to 16), each and can
be an alternative Pan/Tilt adjustment opportunity besides of the appropriate
channelfaders.

3.2.4 Easy mode

The easy mode is Therefore quick testing of DMX controllable units or to extend bigger
DMX desks , where a extra DMX fader unit would be useful. Here there are 12 fixtures
with 10 channels each that are manualyl given (over the 10 faders). The scene keys
respond as flash keys for the first 8 channels of each set. The Blackout function turns all
120 DMX channels to 0. Other functions (except Desklock function) are deactivated.
Technical reference:
14 GLP German Light Products
(V1.3)