Playing A Bank With Music Clock - GLP SCAN OPERATOR FX User Manual

3.17.3 Playing a bank with music clock

1. Press the MUSIC/BANKCOPY key to call up this function. The music
sensitivity stopped last is used automatically and indicated in the display.
The MUSIC LED shines.
2. Use the BANK UP/DOWN keys to select the desired bank. The occupied
scenes of this bank will be called up music-steered, one after another.
3. Use the music speed Fader during the music- beat, in order to change the
sensitivity of the microphone. Thereby you can select from "Fast" to "Slow".
"Slow" reacts relatively sensitively - "Fast" rather insensitively.
Reference:
With sensitivity not the volume of the microphone is regulated (the hardware of
the equipment does that automatically), but it the minimum duration of the bass
impacts and the minimum time between two bass impacts is being changed.
When switching on the set the value "normal" is selected automatically. This is a
good default value, which nearly always fits.
4. Adjust the crossfade time
Fade Time:
Tells us how fast the crossfade time to the next step is. The slowest crossfade
time thereby is 32s. The time refers to an over-dazzle time of value 0 to 255.
Smaller movements are done faster
5. Press the MUSIC/BANKCOPY key to deactivate the music clock again.
Reference:
With the TAPSYNC/MANUAL GO key you can move on to the next occupied
scene of the bank each time, if the set is not in auto-beat. With it the scene can
be released manually during a calm phase of a piece of music.
GLP • German Light Products
(V1.3)
SCAN OPERATOR FX
43