Playing A Bank With Auto-Beat - GLP SCAN OPERATOR FX User Manual

SCAN OPERATOR FX
Reference:
With the TAPSYNC/MANUAL GO key you can move on to the next occupied scene
of the bank.
This function is also available during the auto-beat and/or during the music clock.
With it the scene can be released manually during a calm phase of a piece of music.

3.17.2 Playing a bank with auto-beat

This function makes it possible to let a bank of scenes or a Chaser run
automatically in a loop.
1. Press the AUTO key to call up this function. The auto-beat that stopped last is
used automatically and indicated in the display.
The Auto LED shines.
2. Use the BANK UP/DOWN keys to select the desired bank.
3. Now you have different possibilities of playback control:
Speed Fader:
This gives playback speed "NEXT time". The respective time is indicated in the
display (max. 1 step all 12min 30sec).
TAPSYNC Key:
The run off speed of the speed fader is being overwritten. The beat of pressing
the keys twice gives the speed (the slowest adjustment, which you can adjust by
Tapsync key, amounts to 1 step in 32 sec).
4. Adjust the crossfade time
Fade Time:
Tells us how fast the crossfade to the next step is. The slowest crossfade time is
thereby 32s. The time refers to an over-dazzle time of value 0 to 255. Smaller
movements are done faster.
5. In order to deactivate the auto-beat again, press the AUTO key.
42
(V1.3)
GLP German Light Products