GLP SCAN OPERATOR FX User Manual page 9

9. Record + Delete
key
10. PROGRAM +
Setup key
11. Speed/Sensitivity
Fader/FX Speed
Fader
12. Fade Time/FX
Size Fader
13. Pan/Tilt Encoder
+ Fine key
14. FREEZE key
15. Music/BankCopy
key
16. Auto key
17. Tap Sync /
Manual Go key
18. Blackout key
19. Release key
20. FX Editor key
21. FX Clear key
22. Create Wave key
23. Randomize key
GLP • German Light Products
function-keys to record and delete
With these two keys you change the operation mode of the
ScanoperatorFX
Here you can adjust the automatic ... (0,12s – 12m 30s). This
Fader is also used to regulate the sensitivity of the microphone
(slow – fast) and the effect speed.
Here you adjust the Fade time (0 – 32s). The Fade time sets
the time it takes to crossfade between two different scenes or
of a chaser. This Fader is also there to change the size of a
chosen effect.
With the two encoders, you can directly adjust the Pan and Tilt
values of the selected fixtures. The Fine key allows you to work
accurate.
Turns on the DMX Freeze function.
Activates the music-beat or copies the whole Bank
Activates the Auto-Beat.
Allows you to manually trigger the chaser when in Auto-Beat
and learns the timing. The LCD Display then changes between
chaser steps and the current bank.
With the Blackout key you can overwrite the DMX-Output with
self defined data you configured before. For example all
Shutter channels with data "0".
The release key clears all manual changes
This key activates the Effect editor in program mode.
This key deletes the adjusted effects.
This key changes the starting angle of all selected fixtures
automaticly, so that the fixtures will run the current effects like
a wave.
This key randomly changes the first angle of all selected
(V1.3)
SCAN OPERATOR FX
9