Change The Speed Mode Between 5 Minutes And 10 Minutes - GLP Light Operator 48 User Manual

2. Operation Guide
2.3.4 Running a Program With the Standard Beat
REC SPEED
FLASH BUTTONS 25-48

2.4 Change the Speed Mode between 5 Minutes and 10 Minutes

RECORD
RECORD
Flash Button 5 or 10
10 10
8 8
6 6
4 4
2 2
0 0
10 10
8 8
6 6
4 4
2 2
0 0
Tap this button
three times
5. While pressing and holding down the Rec
Speed button, tap the Flash button(25-48) that
stores the program.
6. The program will then run with the set time or
beat when engaged.
7. Repeat steps 4 and 5 to set a new beat time.
1. Press and hold the Record button.
2. Tap the Flash button 5 or 10 three times
while holding down the Record button.
3. The 5MIN or 10MIN should light up indicating
the Speed slider is set to run in the 5 or 10
minute mode.
22