Overlay Scenes; Providing And Editing Scenes From Overlay - GLP SCAN OPERATOR FX User Manual

SCAN OPERATOR FX

3.10 3.10 Overlay scenes

The Scanoperator FX offers 6 selective overlay scenes wich you can provide.
These scenes work exactly, like the Blackout function described above:
Certain channels with certain values in the Play mode overwrite overlay scenes.
As example, it is possible to vary running programs by adding, I.e. strobe effects
or colors or gobos.
Reference:
Since the Blackout function has a higher priority than the overlay scenes, this can
eventually overwrite one activated overlay scene.
3.10.1

Providing and editing scenes from overlay

For providing or editing the overlay scenes you precede as follows:
1. Activate PROGRAM mode (PROGRAM key)
2. Now select bank 31 and/or the position, where bank 31 would be. The display
now shows "Overlay". You can now configure the overlay scenes, like a normal
scene.
3. If you want to provide a new overlay scene, then you can directly continue with
step 5. There is no channel being overwritten first.
4. However, if you would like to edit the existing overlay scene, then load it now
by pressing the appropriate overlay scene key.
Reference:
Empty overlay scenes cannot not be loaded. In this case the message appears
"OL Scene Empty" in the display.
5. Select desired Fixtures with appropriate Fixture keys (LED on). Several
Fixtures can be selected at the same time.
6. Use the Scene keys, in order to switch the channel on or off individually. In the
display the respective condition will be shown with "Channel XY: On "or"
"Channel XY: Off". "On" means that this channel of the selected fixtures will be
overwritten.
28
(V1.3)
GLP German Light Products