Easy Mode - GLP SCAN OPERATOR FX User Manual

SCAN OPERATOR FX
Important:
4. The changes are not automatically durably stored but they are directly
active. Therefore it is necessary that you confirm the changes for durable
storing once with the RECORD or the SETUP key.
5. Press the SETUP key for 3 seconds, to leave the Setup mode again.

3.22 Easy mode

The EASY mode serves for fast tests of DMX fixtures or as additional Faderdesk
for larger DMX Desks, which for which a DMX Faderunit is sense full.
Here 12 Fixtures with 10 channels each are used. The values of the channels are
specified over the 10 Faders of the set (including Fade time and speed). The
scene keys serve as Flash keys for the first 8 channels of each set.
The Blackout scene switches all 120 DMX channels to 0. Other functions (up to
the Desklock function) are deactivated.
In EASY mode you can change DMX values as follows:
1. In order to get to the EASY mode, press the PROGRAM+SETUP key for
3s. The Display now shows the Text "Easy".
2. Now select the Fixtures, which channels you would like to change.
3. You can change the values of the 10 channels per fixture over the Fader.
The PAGE key is functionless.
4. Repeat the steps 2 and 3, in order to use other devices.
Reference:
You can test fast and simply DMX sets in EASY mode or use this desk as
"dummy" DMX Faderunit for larger desks.
50
(V1.3)
GLP German Light Products