GLP German Light Products GmbH Contents Description of Device ..................... 3 Safety Instructions ....................4 Preparation and Installation .................... 5 Safety Information ....................5 Mounting ......................... 6 2.2.1 Operating on the Floor (Upright) ............... 7 2.2.2 Mounting in hanging or sideways position ............7 Securing the Fixture ....................
GLP German Light Products GmbH 1 Description of Device 1. Moving Bar (actively and passively cooled) 2. LCD-Display / Menu (data entry) 3. Base with rubber feet and Camlock mounting system A) Base side left 4. DMX Input (5 pin) 5.
8. Repair, maintenance, and installation work shall be done by qualified or GLP certified staff only. You need to pay attention to the common rules of technology that are not explicitly mentioned in this manual.
GLP German Light Products GmbH 2 Preparation and Installation 2.1 Safety Information 0 fixture from GLP is fitted with a number of plano- convex lenses in a highly efficient collimator cluster. This type of lens can act as a strong magnifying glass.
GLP German Light Products GmbH Should you have any questions about the operation of your fixture then please contact your local GLP office, or their authorized distributor, a list of which can be found at http://www.glp.de. 2.2 Mounting 0 is fully operational whether it hangs or is mounted to the wall.
GLP German Light Products GmbH 4 x Camlock for bracket #1 4 x Camlock for bracket #2 2.2.1 Operating on the Floor (Upright) 0 is fitted with 4x solid rubber feet which allows a stable standing of the fixture. An additional securing is usually not required.
GLP German Light Products GmbH NEUTRIK® powerCON 0 is fitted with NEUTRIK® powerCON locking 3 conductor AC connectors. Up to max. 10 fixtures can be linked via the power outlets staying within the power limits of the 20A of the connectors.
GLP German Light Products GmbH 4 DMX Chanel Selection (DMX Protocol) Normal Mode (norm) 34 DMX channels: Channel Function Time and Value 1 Tilt - High Tilt coarse 0° - 210° 0..255 2 Tilt - Low Tilt fine 0..255...
Page 10
GLP German Light Products GmbH Strobe random 5s - 0.1s 144..199 Strobe effect slow - fast 1 Hz - 10 Hz 200..239 Shutter open 240..255 12 Intensity Intensity 0 - 100% 0..255 13 Special RESET > 1 sec 250..255...
GLP German Light Products GmbH 4.2 Compressed Mode (comp) 20 DMX Channels: Channel Function Time and Value 1 None reserved 2 None reserved 3 Tilt - High Tilt coarse 0° - 210° 0..255 4 Tilt - Low Tilt fine 0..255...
Page 12
GLP German Light Products GmbH 12 CTO No CTO 0..7 Continuous color temperature correction Applicable 8..255 for ALL colors 13 Special RESET > 1 sec 250..255 14 Crossfade 0..2 seconds transistion time 0..255 15 Set 1 Pattern 0..255 Movement...
GLP German Light Products GmbH 4.3 Single Pixel Mode (spix) 88 DMX Channels: Channel Function Time and Value 1 Tilt - High Tilt coarse 0° - 210° 0..255 2 Tilt - Low Tilt fine 0..255 3 Shutter Shutter closed 0..15...
Page 14
GLP German Light Products GmbH 28 Set 5 White Color mixing system - White 0 - 100% 0..255 29 Set 6 Red Color mixing system - Red 0 - 100% 0..255 30 Set 6 Green Color mixing system - Green 0 - 100% 0..255...
Page 15
GLP German Light Products GmbH 66 Set 15 Green Color mixing system - Green 0 - 100% 0..255 67 Set 15 Blue Color mixing system - Blue 0 - 100% 0..255 68 Set 15 White Color mixing system - White 0 - 100% 0..255...
GLP German Light Products GmbH Rainbow-effect Stop will pause this function. After resuming the rainbow-effect will be continued from the current color. The Rainbow-effect will run synchronously only if started from one of the predefined colors (see also before).
GLP German Light Products GmbH 6 Technical Specifications: Power supply Power consumption 450 VA (Watt) Power Input Auto sensing 100-240 V AC, 50-60 Hz Fuse protection Micro-fuse 5x20 mm, T5A Operational Parameters Max. Ambient 5° - 45°C (integrated overheating switch) Temperature 40°-113°F...