Technical Specifications; General Data; Dmx Parameter; Desklamp Connection - GLP SCAN OPERATOR FX User Manual

SCAN OPERATOR FX
3.27 Showing version
If you keep the MUSIC/BANK COPY key pressed when switching the Unit on, the
Softwareversion of your Scanoperator appears in the display. When this manual
was printed, Version 1.3 was up-to-date.

4 Technical specifications

4.1

general data

DC Input ........................................................................................................... DC 12V, 1A
DMX Exit .....................................................................................................3 pol, female XLR
MIDI Signal ...............................................................................................5 pol, DIN Standard
Audio Control .......................................................................................... Built-In Microphone
Dimensions ................................................................................................482 x 176 x 73 mm
Weight .............................................................................................................................2,5 Kg
4.2

DMX Parameter

Channels sent.........................................................................................................................192
Break..................................................................................................................................151us
Mark after Break.................................................................................................................24us
Channeltime (Frametime + Mark after Frame).................................................................49us
DMX Continuerate.............................................................................................................36Hz

Desklamp connection

4.3
The Scanoperator FX offers a 3 pol XLR socket on the front plate for the
connection of a 12V/5W Desklamp. Pin 2 is connected +12V and to pin 3 with
mass. The Desklamp connection is protected by a self resetting fuse, so that the
desk still functions, for example, after a short-circuit by a defective Desklamp.
Please note that it can take some seconds after removing the source of error due
to the inertia of the safety device, until the equipment functions again perfectly.
54
(V1.3)
GLP German Light Products