Operator's Seat - Volvo EC35 Operator's Manual

2
1
4
3
1012219
c
b
a
1011271
1011176

Operator's seat

A correctly adjusted operator's seat is an essential contribution to
operator comfort and safety!
Operator's seat settings
WARNING!
Do not adjust the operator's seat while the machine is mov-
ing.
Horizontal adjustment
– Pull lever (1) slightly up:
– Adjust the seat to the desired position.
– Check that the seat has properly engaged.
Backrest adjustment
– Pull lever (2) slightly up.
– Adjust the inclination of the backrest.
– Once the backrest is locked in position, the inclination can no
longer be changed.
– Pull the lever up again to unlock and adjust the backrest.
Weight adjustment
– By turning the little wheel (3) clockwise or anti-clockwise a ligh-
ter or heavier weight of the operator can be adjusted on the
scale (4).
– The value displayed by the scale (4) corresponds with the dif-
ferent seat hardness settings.
Adjusting the seat height
The seat height is adjusted without having to operate a lever. Pull
the seat with both hands up to a higher position.
To raise the seat:
– Lift the seat with both hands, until it clicks audibly into place. 3
positions (a), (b) and (c) are possible.
To lower the seat:
– Lift the seat with both hands fully up; it will then engage again
in lowest position.
Seat belt
WARNING!
The seat belt must be replaced immediately if it is damaged
or has been strained in an accident.
IMPORTANT! Due to soiling by water and dirt the seat belt
must be replaced every 3 years!
Other controls
Operator's seat 35