Alcatel-Lucent 7330 Product Information Manual page 415

4
5
6
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA
Figure NTP 107-1: I-010G-B indoor ONT connections
Ethernet port (RJ-45)
Power connector
Power switch
Replace the ONT with a new unit:
a On a flat surface, such as a desk, substitute the replacement ONT for the old
ONT that is resting horizontally; go to step 5.
b In a stand.
i Unsnap the old ONT unit from the channels built into the stand. Snap
the replacement ONT into the channels built into the stand, ensuring it
is securely held.
ii Place the new ONT with stand vertically on a flat surface; go to step 5.
c On a wall.
i Slide the old ONT upward and then away from the two mounting screws
until the ONT is free of the wall.
ii Install the replacement ONT following the wall mounting instructions
for an I-010G-B indoor ONT (DLP 115).
Connect one Ethernet cable to the LAN RJ-45 port (DLP 101).
If required, have approved service personnel who are trained to work with optic
fiber clean the fiber optic connection. See DLP
fiber optic handling, inspection, and cleaning.
Danger — Fiber optic cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
Edition 01 ONT Product Information Guide
NTP 107 — Replace an I-010G-B indoor ONT
127
March 2011
Fiber optic connector
for more information about
NTP 107-3
21469