Alcatel-Lucent 7330 Product Information Manual page 240

5 — VoIP overview
Parameter Description
message_event_uri The URI to which a subscription for
message-waiting events is sent. If
this property is not set, the user
agent shall not subscribe for
message waiting events. This value
is a URI The default is no URI,
which disables subscribe. When
the parameter is set to URI, you
can configure the
allow_unmatched_notify
parameter.
When the string autofill is used,
this keyword substitutes a new
message_event_uri value based on
the filled value, after any derived
value, of the address_of_record
parameter.
For other devices, the value is an
empty string and cannot be
changed.
message_waiting_m The mode for presenting a
ode message-waiting indication to the
user. This is a sequence of up to
three values: "dial-tone" to enable
stutter dial tone, "visual" to
enable visual MWI, and
"reminder-ring" to enable a
reminder ring. Any combination of
the three may be specified. This is
an optional parameter. The
default value is "dial-tone."
You can specify more than one
value at a time in the XML file.
Separate the values using spaces.
vmwi_refresh_interv The duration, in minutes, of the
al interval between successive
"refresh" transmissions of the
message-waiting status to the
analog line, if "visual" is specified
in message_waiting_mode. If the
value of this property is zero,
"refresh" transmissions will not be
performed. This is an optional
parameter. This is a non-negative
integer expressed in minutes. The
default value is 30.
vmwi_abbreviated_r Indicates whether the abbreviated
ing ring option is enabled. This is a
string containing a value of "yes"
or "no." This is an optional
parameter. The default value is
"no."
For other devices the value is no
and cannot be changed.
(8 of 23)
5-40
Mode Mode
1 2
N Y
Y Y
Y Y
Y Y
March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01
Device OMCIv2 TL1 or CLI
support? parameters
Package Yes TL1 using
A, B, H VOICEMAIL
only using
ed-ontvoicep
ortsip
CLI using
voice-mail-pr
of
configure
voice ont
voice-sip-por
t
All Yes TL1 using
except CALLPRESENT
package set to 7 using
C, D, ent-profile-v
and E oipappservic
e
CLI using
mwi-splash-ri
ng,
mwi-spl-dialt
one,
mwi-visual-in
di
using
configure
voice ont
voip-app-serv
ice
All No, value is N/A
except derived
package from
C, D, FTP/default
and E line profile.
Package No, value is N/A
A, B, H derived
only from
FTP/default
line profile.
3FE 54199 AAAA TCZZA
using