Alcatel-Lucent 7330 Product Information Manual page 254

Intelligent services access manager
Hide thumbs Also See for 7330:
Table of Contents

Advertisement

5 — VoIP overview
Parameter
Description
enable_3wc_focus
Specifies the behavior of the ONT
when generating contact name in
an INVITE of a second call. The
options are:
When set to true, the ONT appends
3WC to the contact name and adds
the isfocus header. If the
three-way call is reduced to a
two-way call, a re-invite is sent to
remove the isfocus.
When set to false, the ONT does
not append 3WC to the contact
name and does not add an isfocus
header to the invite message.
You can configure the parameter
when the enable_etsi parameter is
set to true
prefer_early_media
Specifies whether to continue to
output early media to a user even
after the ONT receives a 180
ringing response.
The options are:
This parameter is available in XML
releases R4.1 and 4.3, but not
R4.2.
enable_service_in_r
Specifies whether the ONT
emote_hold
supports supplementary services
such as three-way calling, call hold
display, and call transfer when the
call session is remotely held.
The options are True/1/Yes and
False/0/No. If this parameter is set
to True, then ONT supports the
supplementary services. The
default is False. This attribute is
only supported in XML R4.4 and
later.
service_code_enabl
Specifies the feature access
e_warm
service code used by subscriber to
activate warmline. The user agent
must support at least two service
codes, as is typical in most dialing
plans. The default is *53*. This
reflects that fact You can
configure the parameter when the
enable_warmline parameter is set
to Subscriber.
(22 of 23)
5-54
true (default)
false
True/1/Yes to ignore the 180
ringing response
(default) False/0/No to
suppress the early media
session and play a local
ringback tone
March 2011
ONT Product Information Guide Edition 01
Mode
Mode
Device
1
2
N
Y
All
except
package
C, D,
and E
N
Y
All
except
package
C, D,
and E
N
Y
All
except
package
C, D,
and E
N
Y
All
except
package
C, D,
and E
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
OMCIv2
TL1 or CLI
support?
parameters
No, value is
N/A
derived
from
FTP/default
line profile.
No, value is
N/A
derived
from
FTP/default
line profile.
No, value is
N/A
derived
from
FTP/default
line profile.
No, value is
N/A
derived
from
FTP/default
line profile.
3FE 54199 AAAA TCZZA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7302

Table of Contents