Alcatel-Lucent 7330 Product Information Manual page 250

5 — VoIP overview
Parameter Description
enable_calling_nam This parameter determines
e_id whether a display name is output
to the phone set.
When the parameter is set to 'yes
(default), the display name is
included as part of the caller ID
output data. When the parameter
is set to 'no', the display name is
not included as part of the caller ID
output data.
callerid_uri_prefere This parameter specifies whether
nce to set tel-uri as a higher priority
than sip-uri, when there is more
than one p-assert header present.
Supported parameters are 'sip',
'tel', or 'first'. Unsupported values
are mapped to 'first'. If an
incoming call contains more than
one p-assert header, this
parameter controls which header
is used to populate the caller ID
data output on the phone set.
When the parameter is set to 'sip',
the p-assert header that is formed
with a sip-uri will be used. When
the parameter is set to 'tel', the
p-assert header that is formed with
a tel-uri will be used. When the
parameter is set to 'first'
(default), it indicates the p-assert
header that occurs earlier in the
incoming INVITE will be used for
the caller ID data. The default is
'first'
add_media_level_cli This parameter controls the
ne presence of the second "c-line", or
contact address, in the SDP for
obsolete hold. This parameter is
ignored when the obsolete_hold
parameter is not enabled. The
options are "yes" (default)
meaning the second c-line will be
added as part of the media
description, and "no", meaning
only a single session-level c=line is
present in the SDP, and it is set to
0.0.0.0.
(18 of 23)
5-50
Mode Mode
1 2
Y Y
Y Y
N Y
March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01
Device OMCIv2 TL1 or CLI
support? parameters
All Yes TL1 using
except CALLERID set
package to 2 using
C, D, ent-profile-v
and E oipappservic
e
CLI using
calling-numb
er
using
configure
voice ont
voip-app-serv
ice
All No, value is N/A
except derived
package from
C, D, FTP/default
and E line profile.
All No, value is N/A
except derived
package from
C, D, FTP/default
and E line profile.
3FE 54199 AAAA TCZZA