Alcatel-Lucent 7330 Product Information Manual page 210

5 — VoIP overview
Service
Basic call
Emergency number (911)
(1)
Call forwarding status
indications (1)
Call hold (ANSI) (1)
Call hold (ETSI)
Reverse polarity (ETSI) (1)
Tone of death (ETSI) (1)
HF using INVITE (1)
Call transfer
(1)
Call park
Call waiting (ANSI) (1)
Call waiting (ETSI)
Fax service
Caller ID (1)
(1 of 3)
5-10
Table 5-2 SIP service features
Description
Basic calling functions
Basic 911 support
Enhanced 911 support
Denial of feature use
Emergency ringback
Forced hold
Splash ring when a call is actually
forwarded
Stutter dial tone while call forwarding is
active
Implicit call forward status indicators for
FS 5000 softswitch cannot be configured
using TL1.
Basic hold (flash hook supported)
Remote hold/network hold
Basic hold (flash hook supported)
Remote hold/network hold (1)
—
—
For FS 5000 softswitch interoperability
Blind and consultative call transfer
Call transfer attended and unattended
Basic call waiting
Delivery of calling number and name
Cancel call waiting
Activate/deactivate/interrogate call
waiting
Basic call waiting
Delivery of calling number and name
Cancel call waiting (1)
Activate/deactivate/interrogate call
waiting (1)
T.38
Pass through
Delivery of calling party number and
name
Caller ID
March 2011
ONT Product Information Guide Edition 01
SIP SIP OMCIv2
mode 1 mode 2
Y Y Some parameter such as
contact_uri must be
configured on the ONT
using XML.
Y Y Fully configurable
— Y
— Y
— Y
— Y
— Y Reminder ring and
cfsi_event_uri must be
Y Y
configured using XML.
Y Y Fully configurable
— Y
Y Y ETSI mode cannot be
configured using TL1.
— Y
— Y ETSI mode cannot be
configured using TL1.
— Y ETSI mode cannot be
configured using TL1.
Y — thin_client_HF_method is
only supported using XML.
Y Y Fully configurable
— Y
Y Y Fully configurable
Y Y
Y Y
Y Y
Y Y ETSI mode cannot be
configured using TL1.
Y Y
Y Y
Y Y
Y Y Fully configurable
Y Y
Y Y Basic caller ID is
configurable using TL1.
Y Y
Details such as ID format,
URI preference, and
country code stripping
must be configured using
XML
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA