Alcatel-Lucent 7330 Product Information Manual page 209

Intelligent services access manager
Hide thumbs Also See for 7330:
Table of Contents

Advertisement

5.4
SIP modes
The 7342 ISAM FTTU supports two SIP modes:
SIP mode 1: thin client interworking with softswitches, such as Broadsoft
Broadworks (not supported on package D ONTs)
SIP mode 2: thick client interworking with softswitches, such as Nortel CS2000
When configuring SIP using OMCIv2 via TL1 or CLI, the Softswitch parameter
identifies the SIP gateway softswitch vendor. The format is four ASCII coded
alphabetic characters [A..Z] as defined in [ATIS-0322000]. A value of four null
characters indicates no particular vendor.
Starting in Release 04.02.02, the setting of this Softswitch parameter signals to the
ONT to use various types of SIP. Until all softswitch vendor IDs are identified,
package A, B, and H ONTs interpret some specific settings as follows:
THIN = legacy SIP 1 - Mode 1 SIP - thin client
any other setting including null = legacy SIP 2 - Mode 2 SIP - thick client
In the two SIP modes, the SIP switches provide the SIP server functions, while the
ONT provides the SIP user agent functions, including the following.
controls the analog states of the POTS line to locally invoke call setup and call
tear-down
generates dial tone locally
collects dialed digits and send the dialed string to the SIP switch
plays ringback tone and busy tone
derives caller ID FSK from headers in signaling messages
supports NTP date and time for caller ID (not supported on package D ONTs)
establishes or disconnects an RTP bearer path and RTCP to another VoIP media
gateway
call statistics with call history (not supported on package D ONTs)
Redundancy in SIP mode 1 or SIP mode 2 is supported if a domain name is
configured for the registrar_route and outbound_proxy parameters in the SIP
provisioning data and a DNS server address is provided through DHCP; see
section 5.6. The ONT automatically contacts the domain name server (DNS) and
obtain a list of A records or SRV records. The ONT uses the records to contact
possible SIP servers according to the methodology outlined in RFC 3263. This is not
supported on package D ONTs.
SIP service features
Table
service feature is configurable using TL1 via OMCIv2.
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA
5-2
lists the service features supported by the two SIP modes and whether the
Edition 01 ONT Product Information Guide
March 2011
5 — VoIP overview
5-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7302

Table of Contents