Alcatel-Lucent 7330 Product Information Manual page 391

10
11
12
13
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA
Make the fiber optic connection as shown in Figure
Warning — Be careful to maintain a bend radius of no less than 1.5
inches (3.8 cm) when connecting the fiber optic cable. Too small of a
bend radius in the cable can result in damage to the optic fiber.
Verify the ONT LEDs, voltage status, and optical signal levels (DLP 120).
Activate and test the services (DLP 121).
STOP. This procedure is complete.
Edition 01 ONT Product Information Guide
NTP 104 — Replace an I-010G-A indoor ONT
March 2011
NTP 104-1.
NTP 104-3