Alcatel-Lucent 7330 Product Information Manual page 326

6 — ONT management using an ONT interface
3
4
Procedure 6-40 To enter the SLID
1
2
6-58
The SLID clear dialog box opens, as shown in Figure 6-34.
Figure 6-34 SLID clear dialog box
Click on YES to reset the SLID. The SLID window is refreshed with the default SLID
settings for the ONT.
Note — After a SLID is reset, the SLID value is DEFAULT.
STOP. This procedure is complete.
Ensure that the ONT is disconnected from the PON optical cable.
From the SLID window, ensure that the SLID value is null or DEFAULT, as shown
in Figure 6-35.
March 2011
ONT Product Information Guide Edition 01
Figure 6-35 SLID window
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA