Alcatel-Lucent 7330 Product Information Manual page 237

Parameter Description
intercom_code_1 A set of one or more home
intercom service codes for alerting
pattern 1. This reflects that fact
that in typical dial plans there are
two equivalent ways to dial a given
service code. This is a string. The
value of this property may include
up to two service codes, each up to
6 characters long, separated by
white space. The default is "*53
1153."
For other devices the setting is
"*53 1153" and cannot be changed.
intercom _code_2 A set of one or more home
intercom service codes for alerting
pattern 2. This reflects that fact
that in typical dial plans there are
two equivalent ways to dial a given
service code. This is a string. The
value of this property may include
up to two service codes, each up to
6 characters long, separated by
white space. The default is "*54
1154."
For other devices the setting is
"*53 1154" and cannot be changed.
enable_cw Indicates whether the call waiting
service is enabled. This is a string
containing a value of "yes" or
"no." The default value is "yes."
business_cw Indicates whether the business
group variant of the call waiting
service is enabled. This is a string
containing a value of "yes" or
"no." The default value is "no."
enable_3wc Indicates whether 3-way
conference service is enabled. This
is a string containing a value of
"yes" or "no." The default value is
"no."
(5 of 23)
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA Edition 01 ONT Product Information Guide
Mode Mode Device
1 2
N Y Package
A, B, H
only
N Y Package
A, B, H
only
Y Y All
Y Y All
except
package
C, D,
and E
N Y All
March 2011
5 — VoIP overview
OMCIv2 TL1 or CLI
support? parameters
Yes, but TL1 using
only one INTERCOM
intercom using
code is ent-profile-a
supported cccodes
CLI using
intercom
using
configure
voice ont
feat-acccode
-prof
No, value is N/A
derived
from
FTP/default
line profile.
Yes, enabled TL1 using
if both call CALLWAIT set
waiting and to 3 using
caller ID are ent-profile-v
configured oipappservic
e
CLI using
call-waiting
using
configure
voice ont
voip-app-serv
ice
No, value is N/A
derived
from
FTP/default
line profile.
Yes TL1 using
CALLPROGTR
AN set to 1
using
ent-profile-v
oipappservic
e
CLI using
three-way-ca
lling
using
configure
voice ont
voip-app-serv
ice
5-37