Alcatel-Lucent 7330 Product Information Manual page 223

Parameter Description
subscribe_p The subscription expiration time that
eriod (1) the client will propose by including it in
an Expires header of a SUBSCRIBE
request. This is a non-negative integer
and the value is expressed in
seconds.The default value is 86400
(one day). (This parameter does not
apply to iConfig requests.)
subscribe_h The number of seconds prior to
ead_start (1) expiration of a subscription at which
the client sends a SUBSCRIBE request
to refresh the subscription.This is a
non-negative integer and the value is
expressed in seconds. The default
value is 3600 (one hour).
sip_timer_t1 The value of the SIP T1 timer (the
(1) round-trip time estimate). This is a
non-negative integer and the value is
expressed in milliseconds. The range is
1 to 65535. The default value is 500.
sip_timer_t2 The value of the SIP T2 timer (the
(1) maximum retry interval for a
non-INVITE request). This is an integer
and the value is expressed in seconds.
The range is 1 to 65535. The default is
4.
sip_invite_ti The INVITE transaction timeout,
(1)
meout designated as Timer B in RFC 3261. This
is an integer. The value is expressed in
seconds. The range is 1 to 65535. The
default value is 32 (64*T1).
sip_noninvit The non-INVITE transaction timeout,
e_timeout (1 designated as Timer F in RFC 3261. This
) is an integer and the value is expressed
in seconds. The range is 1 to 65535.
The default value is 32 (64*T1).
default_pro Specifies the application server
duct_id product identifier that shall be
assumed for product-specific
communication with the application
server if the application server does
not provide a product identifier. The
value of this parameter is any string
that can be used as the value of a
server or user agent header. The
default is an empty string.
(3 of 4)
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA Edition 01 ONT Product Information Guide
Mode Mode Device
1 2
N Y Package
A, B, H
only
N Y Package
A, B, H
only
Y Y Package
A, B, H
only
Y Y Package
A, B, H
only
Y Y Package
A, B, H
only
Y Y Package
A, B, H
only
Y Y All
except
package
C, D,
and E
March 2011
5 — VoIP overview
OMCIv2 TL1 and CLI
support? parameters
Yes, TL1 TL1 using
and CLI VOICEMAILTO
default is using
3600 but ed-ontvoiceportsi
XML p
default is
CLI using
85400
voice-mail-to
using
configure voice
ont voice-sip-port
No, value N/A
is derived
from
FTP/defau
lt line
profile.
No, value N/A
is derived
from
FTP/defau
lt line
profile.
No, value N/A
is derived
from
FTP/defau
lt line
profile.
No, value N/A
is derived
from
FTP/defau
lt line
profile.
No, value N/A
is derived
from
FTP/defau
lt line
profile.
No, value N/A
is derived
from
FTP/defau
lt line
profile.
5-23