NTP 103 — Install an I-010G-A indoor ONT
10
11
12
13
14
NTP 103-6
Figure NTP 103-5: I-010G-A indoor ONT with cabling
SC/APC
connector
Connect the SC/APC fiber optic cable (DLP 118); see Figure
Danger — Fiber optic cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
Warning — Be careful to maintain a bend radius of no less than 1.5
inches (3.8 cm) when connecting the fiber optic cable. Too small of a
bend radius in the cable can result in damage to the optic fiber.
If used, configure the SLID (DLP 122).
Verify the ONT LEDs.
Activate and test the services (DLP 121).
STOP. This procedure is complete.
March 2011
ONT Product Information Guide Edition 01
Ethernet (GE)
RJ-45
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
Power
connector
19836
NTP
103-5.
3FE 54199 AAAA TCZZA