Alcatel-Lucent 7330 Product Information Manual page 216

5 — VoIP overview
Source
Configuration
profile file
iConfig
(2 of 2)
VoIP service configuration is described in subsequent sections as follows:
•
process for country-specific POTS configuration files
•
service and protocol configuration
•
configuration profile (embedded in the software load or FTP download)
•
iConfig (Sipping) configuration for SIP
•
VoIP service provisioning parameters
Process for country-specific POTS configuration files
In order for SIP configuration to work correctly in different countries, XML
download files are used. These XML files contain:
•
CDE data, related to hardware settings specific to a country, such as tone values
and ringing cadences.
•
SIP provisioning data, related to SIP-specific configuration parameters, allowing
for per-ONT and per-POTS line configurations.
The CDE data is gathered by Alcatel-Lucent and used to generate the XML
download files. The XML download files are shipped with the ONT software. The
XML download files are downloaded to the ONTs, and when the ONT initializes and
the VoIP client is activated, the XML content containing SIP configurations is
loaded into system. Alternately, on OMCIv2 systems, some SIP configurations can
be done using TL1.
Service and protocol configuration
Service and protocol configuration requirements are different between the voice
gateway mode and the softswitch mode.
Voice gateway mode
In the voice gateway mode, the service and protocol configuration must be manually
performed using the element management system (EMS). Voice gateway
deployments require some unique considerations during service and protocol
configuration; see Table 5-5.
5-16
Description
Country-specific parameters are stored in a configuration profile file (XML file) to
allow the VoIP services to be configured for individual countries. Configuration
profile files can be embedded in the software load or obtained by FTP download.
When the configuration profile is downloaded using FTP, it may contain SIP-specific
provisioning parameters.
When using an OLT system that supported OMCIv2, many SIP-specific provisioning
parameters can be configured using standards-based TL1 commands.
iConfig is an alternative to the configuration profile method of provisioning
SIP-specific parameters at the ONT. The iConfig external server communicates SIP
Provisioning data to ONTs. This process is intended to allow centralized control and
dissemination of provisioning data to multiple SIP devices, such as ONTs. Not
supported on pacakge D ONTs.
March 2011
ONT Product Information Guide Edition 01
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA