Alcatel-Lucent 7330 Product Information Manual page 352

7 — B-0404-A unit data sheet
Limitation
Downstream p-bit translation is not supported when the
flow is configured for VLAN pass-through. In this case, the
following applies:
•
•
When all of the following apply, the highest UNI-side p-bit
value defined in the p-bit translation profile is used:
•
•
•
(2 of 2)
Note
(1) See 7342 ISAM FTTU Operations and Maintenance Procedures Guide using TL1 and CLI for
information on these parameters.
7-10
a flow with networksidevlan 4096 and unisidevlan 4096,
will pass downstream p-bits to the UNI unchanged
a flow with networksidevlan and unisidevlan set to the
same value (0 to 4094), will pass downstream p-bits to
the UNI changed to the highest p-bit value specified by
the PQ profile
unisidevlan is 0 to 4094 and networksidevlan is 0 to
4094, or unisidevlan is 4096 and networksidevlan is
4096
pbitxlprofid/nm is not 0
p-bit translation is not defined for the downstream
p-bit in the p-bit translation profile
March 2011
ONT Product Information Guide Edition 01
(1)
Parameters
unisidevlan
networksidevlan
pbitxlprofid
pbitxlpofnm
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
Service
HSI
Flow
3FE 54199 AAAA TCZZA