Alcatel-Lucent 7330 Product Information Manual page 387

Power cable
AC/DC power
7
8
9
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA
Figure NTP 103-3: I-010G-A indoor ONT with power supply
connector
connector
Connect the power converter to the ONT. On the I-010G-A indoor ONT, the power
connector is located at the back of the ONT; see Figure
Figure NTP 103-4: I-010G-A indoor ONT connections
SC/APC
connector
Shutter
Verify that the unit is powered. If there is no power, press the On/Off button.
Route the data cable to the RJ-45 Ethernet port at the back of the ONT; see Figure
NTP 103-5.
Edition 01 ONT Product Information Guide
NTP 103 — Install an I-010G-A indoor ONT
Ethernet (GE)
RJ-45
On/Off push button
March 2011
19840
NTP 103-4.
Power
connector
19833
NTP 103-5