Alcatel-Lucent 7330 Product Information Manual page 311

Procedure 6-27 To reboot a Package C ONT
1
2
3
Procedures using CLI interface for Package C ONTs
The following procedure provides the steps to reboot an ONT using the CLI interface
provided with Package C ONTs.
Procedure 6-28 To reboot a Package C ONT
1
2
Procedures using butt set
Not applicable.
6.13 Tracing OMCI and protocol traffic
Tracing is a logging of traffic to detect or resolve networking problems. Trace logs
are normally provided to support staff for troubleshooting. You can trace OMCI,
ARP, DHCP, or IGMP protocol traffic.
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA
Select the Reboot option from the ONT Admin section of the navigation tree in the
GPON ONT window.
The Reboot window appears; see Figure 6-25.
Figure 6-25 Reboot window
Click Reset to reboot the system.
STOP. This procedure is complete.
Type R or r for Reboot from the
STOP. This procedure is complete.
Edition 01 ONT Product Information Guide
6 — ONT management using an ONT interface
SLID menu at any time during the session.
March 2011 6-43