Alcatel-Lucent 7330 Product Information Manual page 320

6 — ONT management using an ONT interface
3
4
5
6
7
8
Procedures using HTTP interface for Package C ONTs
The following procedures provide the steps to enable OMCI and Protocol tracing
using the HTTP interface for Package C ONTs.
6-52
Please select trace file
===============
1. OMCI
2. DHCP
3. ARP
4. IGMP
Enter choice :
Choose the trace log to copy over to the server:
a Choose option 1 for OMCI.
b Choose option 2 for DHCP.
c Choose option 3 for ARP.
d Choose option 4 for IGMP.
The following appears:
Enter server IP address:
Type the IP address of the TFTP server.
The following appears:
Enter file name on the server:
Type the name of the file on the server where the content of trace log is to be
copied.
The system copies the trace log into the specified file on the TFTP server.
If a trace log is not found, the following message appears:
•
No logs to retrieve
Press enter key to continue...
If a trace log is found, the following message appears after the copying is
•
complete:
Done
Press enter key to continue...
Press ↵ to continue. The
To return to Main menu, choose option 11, Return to main menu.
STOP. This procedure is complete.
March 2011
ONT Product Information Guide Edition 01
Secondary menu appears.
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA