Alcatel-Lucent 7330 Product Information Manual page 398

9 — I-010G-B unit data sheet
9.1 I-010G-B part numbers and identification
Table
Part number Mnemonic
3FE 51881 AC I-010G-B
Note
(1) See Chapter 2 Part numbers, ordering, and deployment configuration overview
9.2 I-010G-B general description
I-010G-B indoor ONTs provide a subscriber interface for the system. The ONT
terminates the PON interface and converts it to user interfaces that directly connect
to subscriber devices. The ONT is compatible with all existing subscriber equipment,
including analog phones with both tone and rotary dial capabilities, cordless phones,
modems, fax machines, and caller ID boxes (Type I, Type II, and Type III).
The I-010G-B indoor ONTs are not temperature hardened. These ONTs are intended
for indoor deployment only and can be installed vertically or horizontally on a flat
surface as well as attached to a wall.
These ONTs provide the following functions:
•
network demarcation for all services
•
interworking functions between the GEM and Ethernet layers
•
optical to electrical conversion
•
optics that support received signal strength indication (RSSI)
•
G984.4 standard and revised compliant OMCI interface for ONT management
and provisioning
9.3 I-010G-B software and installation feature support
Table
Features
General ONT and MDU
overview
(1 of 2)
9-2
9-1 provides identification information about I-010G-B indoor ONTs.
Table 9-1 I-010G-B part numbers and identification
(1) Description
GPON I-series ONT unit, version B, 1
Ethernet interface.
9-2 provides a list of software-based features for I-010G-B indoor ONTs.
Table 9-2 I-010G-B indoor ONT software feature support
Chapter
ONT and MDU overview
March 2011
ONT Product Information Guide Edition 01
CLEI
—
for ordering information.
Cross reference for more information
ONT and MDU general descriptions of features and
functions
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
CPR ECI/Bar
code
— —
3FE 54199 AAAA TCZZA