Alcatel-Lucent 7330 Product Information Manual page 222

5 — VoIP overview
Parameter Description
register_hea The number of seconds prior to
d_start (1) expiration of a registration at which
the client sends a REGISTER request to
refresh the registration. This is a
non-negative integer and the value is
expressed in seconds. The default
value is 60.
register_retr The interval between successive
y_interval (1) registration retries after a failed
registration retry. The value is
expressed in seconds. The range is zero
(0) to 65535 and zero (0) disables
registration. The default value is 60.
outbound_pr The address of a server or proxy to
oxy (1) which all SIP requests are to be sent,
except for those for which a server of
proxy is not otherwise specified. It is
either a numeric IP address or a fully
qualified domain name. This is a string
of up to 99 characters and is a required
parameter. The FTP XML name of this
parameter is shown as OutboundProxy.
When the string dhcp is used, this
keyword substitutes the IP address or
domain name returned from DHCP
option 120 instead of the
registrar_route parameter value. If the
DHCP server does not provide an option
120 value, a 0.0.0.0 address is
substituted and invite failure and
subscribe failure alarms are raised for
each configured POTS line.
The outbound_proxy value is
superseded for INVITE requests if the
outbound_uri_suffix value is
configured.
•
outbound_uri_prefix
number + @ + outbound_proxy
when the oubound_uri_suffix value
is not configured
•
outbound_uri_prefix
number + outbound_uri_suffix
when the oubound_uri_suffix value
is configured
(1)
sip_dscp The differentiated services code point
(DSCP) value that should populate the
DS field of SIP packets sent by the user
agent. It is an integer value in the
range of zero (0) to 63. The default
value is the value configured via
SNMP/TL1.
(2 of 4)
5-22
Mode Mode
1 2
Y Y
Y Y
Y Y
(1)
+ dialed
(1)
+ dialed
Y Y
March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01
Device OMCIv2 TL1 and CLI
support? parameters
All Yes, TL1 using
default REREGHEADSTRT
value in using
TL1 and ent-ontsip-config
CLI is 360
CLI using
seconds.
re-reg-head-start
using
configure voice
ont sip-config
All No, value N/A
is derived
from
FTP/defau
lt line
profile.
All Yes, TL1 TL1 using
and CLI OUTPROXYSERVER
allows SIP PROFID using
URI for ent-ontsip-config
outbound
CLI using
proxy but
outproxyserv-prof
the ONT
using
expects a
configure voice
string in a
ont sip-config
non-URI
format.
Package Yes TL1 using DSCP
A, B, H using
only ent-ontsip-config
CLI using dscp
using
configure voice
ont sip-config
3FE 54199 AAAA TCZZA